Classic Bird (55-57) Drehmomente cui 298 - Druckversion +- Ford Thunderbird Club Deutschland (https://thunderbirdclub.de/forum) +-- Forum: Fragen & Antworten (https://thunderbirdclub.de/forum/Forum-Fragen-Antworten) +--- Forum: „Classic Birds“ (1955–1957) (https://thunderbirdclub.de/forum/Forum-%E2%80%9EClassic-Birds%E2%80%9C-1955%E2%80%931957) +--- Thema: Classic Bird (55-57) Drehmomente cui 298 (/Thread-Classic-Bird-55-57-Drehmomente-cui-298)

Drehmomente cui 298 - Berni63 - 21-03-2025 Hallo zusammen, kennt jemand die Anzugs Drehmomente, für alle Schrauben die ein Bestimmtes Drehmoment brauchen.  Schönes WE Vielen Dank Grüße Horst RE: Drehmomente cui 298 - OlDirty - 21-03-2025 Torque Limits (Foot-Pounds) Main Components Main Bearing Cap Bolts: 95-105 Cylinder Head Bolts (Hot): 75 Oil Pan to Cylinder Block: 12-15 Flywheel to Crankshaft: 75-85 Exhaust Manifold to Cyl. Hd.: 23-28 Intake Manifold to Cyl. Hd.: 23-28 Oil Pump to Cyl. Block: 12-15 Oil Pump to Cover Plate: 12-15 Cyl. Front Cover: 23-28 (⅜)** Water Outlet Housing: 12-15*** Rocker Arm Cover: 2.0-2.5 Cam Sprocket to Cam: 35-45† Damper to Crankshaft: 85-95†† Conn. Rod Nuts: 45-50 Conn. Rod Pal Nuts: 3-4 Rocker Shaft to Cyl. Hd.: 12-15 Valve Rocker Arm Adj. Screw (Self Locking) Minimum Torque to Rotate: 3 Push Rod Chamber Cover: 2.0-2.5 Water Pump to Cyl. Block: 12-15 Oil Tube to Oil Pump Nut: 10-12 Oil Tube to Oil Pan Nut: 28-32 Crankcase Vent Outlet Filter Cover Bolt: 3-5 Fuel Pump to Cyl. Block or Cyl. Front Cover: 23-28 Crankcase Vent Adapter to Cyl. Block: 12-15 Engine Mounts Engine Front Support—Conventional Car: Insulator Assembly to Engine Bolts: 45-50 Insulator Assembly to Frame Nuts: 45-50 Engine Front Support—Thunderbird: Insulator Bolt: 85-95 Insulator to Bracket Bolt: 50-60 Bracket to Engine Bolt: 12-15 Engine Rear Support—All Models: Support Retainer to Extension Housing Bolts: 50-60 Support to Frame Nuts: 23-28 Engine Steady Rest—Thunderbird: Upper Bracket to Engine Bolts: 23-28 Notes **12-15 foot-pounds—5/16—inch bolts ***23-28 foot-pounds—312 cubic inch engine †15-18 foot-pounds—312 cubic inch engine ††130-145 foot-pounds—312 cubic inch engine RE: Drehmomente cui 298 - Berni63 - 21-03-2025 Hallo Hendrik, super vielen dank dafür. Grüße Horst RE: Drehmomente cui 298 - Jörg Ellwanger - 22-03-2025 Top!  Danke Hendrik! Hatte bisher nur die Anzugsmomente von Shop Manual herausgeschrieben. Weil da auch Radschrauben und Zündkerzen dabei sind hefte ich es bei.